Sonarworks Reference 4 Studio Edition Speaker and Headphone Calibration Plug-In with Measurement Microphone (Boxed)

Finally you can mix with confidence on your current setup. Sonarworks Reference 4 SE removes unwanted colouration from your speakers and headphones. With the Sonarworks SR (Studio Reference) sound, you can focus on music instead of worrying about the sound in the studio or on-the-go.

$299.00 USD

Additional information

Highlights

Includes XREF 20 Measurement Microphone
Accurate Mixing on Your Studio Speakers
Accurate Mixing on Selected Headphones
Remove Unwanted Sound Coloration
Zero-Latency Processing
Includes Room-Measurement Software
Includes Systemwide App
Calibration Profiles for 101 Headphones
Activate on Three Different Machines
Mac, Windows / AU, AAX Native, RTAS, VST

License Delivery

48-72 Business Hours

*Shipping

Only available within Canada & the USA.

Product Description

Shipping Restriction: This product can only be shipped to the USA and Canada.

Finally you can mix with confidence on your current setup. Sonarworks Reference 4 SE removes unwanted colouration from your speakers and headphones. With the Sonarworks SR (Studio Reference) sound, you can focus on music instead of worrying about the sound in the studio or on-the-go.

 

Finally, you can work with confidence on the setup you have. Sonarworks Reference 4 removes unwanted coloration from your studio speakers and headphones, so you can trust that you hear your mix accurately.

Reference 4 Studio Edition offers the full package of highly powerful software, providing consistent reference sound, both in the studio and on the go. You can also measure your studio with the included mic, in only 10 minutes. Reference 4 then creates a calibration profile. For headphones, select a pre-made profile and you’re ready to go. Calibration can be run in DAW via plugin for lowest latency or via Systemwide for maximum versatility.

Reference 4 Studio Edition includes:

  • Reference 4 Measure – find out where your monitors need help
  • Reference 4 DAW plugin – reference sound combined with zero latency for any musical endeavor
  • Reference 4 Systemwide – apply calibration to all outgoing audio
  • XREF20 measurement mic – sniffs out any faults your setup might have

All products can be activated on 3 machines.

Reference 4 Measure

The intuitive Reference 4 Measure process uses patent-pending technology to generate a profile of the frequency response of your room and speakers. The step-by-step process takes you through 37 data-source points to create a calibration profile from an array of data.

Once a calibration profile is generated, Reference 4 will correct unwanted or lost frequencies to attain the Studio Reference (SR) sound in your chosen DAW or using Reference 4 Systemwide.

Even in some of the most unruly rooms, a precision of +/- 0.5dB is attained.

Reference 4 Systemwide

As a standalone application, Reference 4 Systemwide becomes a virtual audio driver delivering the Sonarworks SR sound. Your system’s audio output becomes calibrated based on the headphone or speaker profile allowing you to reference your favorite music ahead of a session or enjoy music as it was intended.

Systemwide also features:

  • 2 filter modes: zero latency and phase linear
  • Target curve customization
  • Pre-defined non-flat target curves
  • Mono monitoring
  • Clipping control
  • Dry/Wet control

Reference 4 Plugin

The Reference 4 Plugin will sit at the end of your track, sub or master bus in any application supporting VST, AU, AAX or RTAS plugins. By an average headphone profile or individual speaker calibration,  you’ll remove unwanted hardware colouration. You can then work with confidence and hear every sound in your mix without leaving your DAW.

The plugin provides features that balances CPU efficiency and filtering latency. They include:

  • 2 filter modes: zero latency and phase linear
  • Target curve customization
  • Pre-defined non-flat target curves
  • Mono monitoring
  • Clipping control
  • Dry/Wet control

Product Benefits

  • Focus on music instead of worrying about your setup because Reference 4 removes unwanted coloration from your studio speakers or headphones.
  • Make the right impact on every listener out there because you can hear exactly what’s going on in your music.
  • Get more out of your gear because calibration upgrades your equipment to ultimate accuracy.
  • Work wherever you have your laptop because calibrated headphones become a legitimate tool for serious audio production.
  • Spend less time double-checking and chasing the last fixes because accurate monitoring results in clean mixes.
  • Get the relevant feedback because your collaborators will hear the music as you do.

System Requirements

  • Mac: macOS 10.9 or later
  • PC: Windows 7 or later
  • Hardware: 2 GB RAM; 1024×768 display
  • Audio interface with phantom power for the XLR measurement microphone (not included)
  • Sonarworks supported headphones or Sonarworks individually calibrated headphones
  • Sonarworks Systemwide is compatible with ASIO drivers

Includes XREF 20 Measurement Microphone
Accurate Mixing on Your Studio Speakers
Accurate Mixing on Selected Headphones
Remove Unwanted Sound Coloration
Zero-Latency Processing
Includes Room-Measurement Software
Includes Systemwide App
Calibration Profiles for 101 Headphones
Activate on Three Different Machines
Mac, Windows / AU, AAX Native, RTAS, VST

$299.00 USD

Additional information

Highlights

Includes XREF 20 Measurement Microphone
Accurate Mixing on Your Studio Speakers
Accurate Mixing on Selected Headphones
Remove Unwanted Sound Coloration
Zero-Latency Processing
Includes Room-Measurement Software
Includes Systemwide App
Calibration Profiles for 101 Headphones
Activate on Three Different Machines
Mac, Windows / AU, AAX Native, RTAS, VST

License Delivery

48-72 Business Hours

*Shipping

Only available within Canada & the USA.